Friday 29 May 2015

Revue Thommen Movements

The range of size 16 movements by Revue Thommen appears to be very large, but all it not quite as it seems.

Some Revue Thommen Movements - Click to enlarge.
 
These movement look fairly different, in fact apart from materials (and the gilt ones were also made with the nickel finish and vice-versa) they are essentially the same. Shown are some hunter and open faced versions but all variants were available as either.

The winding / setting mechanism, barrel, gear train and lever pallet are exactly the same (for watches made at about the same time) and for setting can have, without modification, a long winding stem as shown in the two centre examples or a short one for cases with a captive crown and stem. The balance assembly on all of these movements may be either  over-sprung or Breguet with either a cut compensating balance or a screwed balance (with Elenvar spring). The number of jewels can be varied and a micro adjusted used instead of the standard index for further variation.

The top plates and cocks are clearly different but the main body of the movement is the same except for being drilled differently to take the two studs and between 1 and 4 screws used to locate and secure each cock and plate.



No comments:

Post a Comment

Note: only a member of this blog may post a comment.